MASAR Smart Marine Device

Device StatusWaiting

Packets Today0

Today's Cost0

Action Items0

Action Items Detail

Priority	Boat	Issue	Action
Loading action items...

Action Details

StatusNo action selected

Active Device Alerts

No active device alertsLive hardware alerts will appear here.

Route map • live device position

Starlink primary • LTE fallback

🚤

Waiting for live boat

No device packet loaded

Current--

Max--

Min--

Heading--

ETA--

Trip Fuel--

Current Trip

RouteNo active route

Distance / Remaining0 NM / 0 NM

Trip Time--

Fuel Rate--

ConnectionWaiting for device

Device Timeline

--Waiting for device packetNo hardware packet received in this session.

The device is the trusted source.

MarineOS should not look like a manual dashboard. The device must prove value by producing reliable data that management can trust every month.

Selected Device

Boat--

Primary--

Fallback--

GPSWaiting

Last Packet--

Device Captures

GPSLocation / route

SpeedCurrent / max / avg

HeadingDirection

Engine hoursService countdown

Connectivity

PrimaryStarlink Wi‑Fi

BackupLTE

HealthOnline / offline

PacketsStored history

Device Outputs

Monthly reportTrips / cost / speed

MaintenanceHours-based service

SafetyStop-operation flag

ManagementOne reliable view

-- Monthly Device Report

Select a boat first, then generate the shareable operational report. It shows trips, fuel, engine service, safety, geofence warnings, SOS records, route compliance, maintenance and connection health.

Hardware → Report Flow

Device
GPS / speed / heading / hours

→

Connectivity
Starlink / LTE

→

Report
Trips / fuel / safety / service

Report Summary

Total Trips0

Total Distance0 NM

Engine Hours0 h

Total Operating Cost--

Max Speed--

Min Speed--

Average Speed--

GPS Packets0

Fuel Used--

Fuel Cost--

Full Trips--

Service Status--

Route Legs--

Route Deviations--

Geofence Warnings--

Safety Reviews--

Report statusReady to generate

Excel file statusNot downloaded yet

Manual downloadGenerate first

Maintenance

Next serviceNo engine data

Open work orders0

Maintenance cost0 BHD

Parts cost0 BHD

Device Health

Starlink uptime--

LTE fallback--

Last packet--

Data qualityComplete

Trip Counter Record

Active routeNo active route

Full trips0

Completed legs0 / 0

Skipped stops0

Trip statusNot assigned

Fuel & Operating Cost Record

Fuel used--

Fuel cost--

Fuel price--

Cost / NM--

Total operating cost--

Engine Service Record

Boat service meter--

Highest engine--

Next service--

Hours remaining--

RuleHighest engine hour

Safety / SOS Record

SOS statusNo active SOS

Time--

Position--

Safety reviews0 pending

NoteAdditional to VHF 16 / DSC

Geofence Warning Record

StatusNo active warning

Event--

Position / speed--

Safety Review--

Warnings this report0

Operation Route Record

RouteNo active route

Points--

From / To--

Status--

Route approvalNo approved proposal yet

Reviewed by--

Ready Assets

Can operate0

Service Soon

Hours-based0

Blocked

Device / maintenance0

Device-Linked Asset List

Boat	Status	Engine Hours	Device	Open
Waiting for pilot boat and device.

Boundary Types

Active zones0

Draft points0

Recent events0

Allowed Operating Zone CoreAlert when the boat exits the approved operating area.

Restricted Zone CriticalAlert when the boat enters a blocked or restricted area.

Speed Zone LimitAlert when the boat is inside the zone and exceeds the selected speed limit.

Map Boundary Builder

Click on the map to place the first point and continue around the boundary. Drag any blue point to adjust its position. No coordinate typing is required.

Drawing Allowed Zone

How to draw: click map → add points → drag points if needed → save zone.

Cursor / selected point--

No draft points yet. Click on the map to place Point 1.

Add / Save Zone

Zone type Speed Zone requires a speed limit in knots.

Zone name Use a clear operational name.

Apply to boat For pilot, keep MASAR-27 selected.

Speed limit / knots Editable when Zone Type is Speed Zone. Saved Speed Zones can also be edited from Active Zones.

Severity Critical appears as a high-priority Action Item.

Active Zones

Stored in Supabase

Zone	Type	Boat	Speed Limit	Points	Status	Action
No zones loaded.

Recent Geofence Events

Reports record violations

Time	Boat	Event	Severity	Position	Safety Status	Action
No geofence events recorded.

Operation Route Planner

Create draft-based route proposals or manual multi-point operation routes from one Route Builder. Each operation point creates a 30 meter circle. Only approved / active routes are shown on the Command map.

Linked to Command Map

Active routes0

Draft points0

Default radius30 m

Operation Map Builder

For manual operation points, click the map to add Point 1, Point 2, Point 3, etc. Drag any numbered point to adjust. Each point automatically creates a 30 meter operation circle.

Route Draw Mode

Unified Route Builder: single-click = manual operation point. Double-click = FROM / TO proposal. Manual point click will clear proposal selection only, not saved routes.

Cursor / selected point--

No operation points yet. Click the map to place Point 1.

No optional correction corridors yet.

Route Builder

Compact route creation: draft proposal, optional correction points, and Port Captain edit in one panel.

CompactBlue Water Proposal Engine + Trip Counter + Engine Service + Real Supabase Auth

Map actions: single-click = add manual operation point. Double-click = set From / To proposal. Manual point mode is always available.

From Departure location.

To Arrival location.

Draft / m Boat draft.

Clearance / m Safety margin.

Route name Proposal name.

Port Captain Reviewer.

Required depth1.8 m

Map selectionFrom and To not selected

Current proposalNo proposal selected

ApprovalWaiting for proposal

Manual points

Manual route name For manually drawn routes.

Next point name Single-click map to add.

Point type Operation point type.

Radius Default 30m.

Apply to boat Pilot: MASAR-27.

Optional correction corridor depth / m Verified minimum depth for this manually optional expert correction.

Optional correction corridor name Used by Depth Route Finder when routing.

Port Captain edit

Manual point entrySingle-click + drag

Point circle30 meter radius

Command mapApproved / Active only

StatusReady to add Point 1

Route Builder is separate from Geofence. Approved routes go to Command map.

Route Proposals / Port Captain Review

Approved routes only go to Command

Route	From	To	Required Depth	Status	Reviewed By	Action
No route proposals yet.

Active Operation Routes

Shown on Command Map

Route	Boat	Points	From	To	Radius	Status	Action
No operation routes loaded.

Hidden / Archived Routes

Hidden routes are saved but not shown on the Operation map or Command map. Restore brings the route back to the available route list.

Saved but not visible

Route	Boat	Points	From	To	Radius	Status	Action
No hidden routes.

Active Operation Points

30m circles

Order	Point	Type	Position	Radius
No operation points loaded.

Trip Counter Engine

GPS packets are checked against the approved multi-point route order. The engine counts legs, full trips, skipped stops and route progress. Route proposal does not count trips until approved / active.

StatusNo route assigned

Route--

Current leg--

Next stop--

Completed legs0 / 0

Full trips today0

Decision Rules

Eligible routeApproved / Active only

Point orderA → B → C → D

Arrival dwell30 seconds inside point radius

Start speed3 kn minimum

False count protectionDwell + exit + order

Skipped stopDeviation event

Device sends GPS only. Trip logic runs in MarineOS backend / edge function.

Trip Legs

Multi-point route

Leg	From	To	Status	Completed
Load a route to see legs.

Live Events

State machine

--No trip events yetWaiting for real device GPS packets.Waiting

Trip Sessions

Counts stored

Session	Boat	Route	Status	Legs
No completed session yet.

Engine Hours & Service Reminder

MarineOS stores each engine hour separately, but boat service reminders use the highest engine hour. This is safer for twin, triple and quad engine boats because no engine can pass the service interval.

Highest hour rule

Boat service meter--

Status--

Next service due--

Hours remaining--

Last service hour--

Reminder starts--

Interval100 h

Reminder before30 h

Installation Rule

Install baselineEnter real hour meter

Service reminderHighest engine hour

Service togetherAll engines

Manual correctionAdmin + reason + audit

Counting sourceDevice power

Device powered ON = engine hours counting. Device powered OFF = engine hours stopped.

Waiting for device data

Quick Configuration

Live Supabase configuration

Boat ID Last Service Hour Service Interval Reminder Before

Individual Engine Hours

Stored separately

Engine	Baseline	Counted	Current	Signal
Waiting for engine packets.

Service Audit Log

Controlled records

--

No audit recordsWaiting for service records.

Waiting

Service Logic

Highest hour formula

Condition	Status
Highest hour below reminder start	OK
Highest hour within reminder window	Upcoming
Highest hour equal / above due	Due / Overdue

Maintenance Triggered By Device Hours

Work orders are created from real device and engine-service conditions.

🛠️

No open work orderReal device and service alerts will appear here.

Clear

Summary

Open work orders0

Critical maintenance0

Next service sourceDevice engine hours

Maintenance Defect Log

Use this only when a real defect is reported. Maintenance closes the defect first, then Safety releases the boat.

Defect type

Severity

Defect description

Action required

Reported by

Boat	Defect	Severity	Status	Action
No defect selected.

Operating Cost Summary

Boat	Trip cost	Maintenance	Parts	Total
MASAR-27	--	--	--	--

Cost Answer

Total fleet operating cost is --. The selected boat cost is edited below and is linked to the active boat only.

Add / Modify Cost — MASAR-27

Choose the boat from the top Active boat selector. This form saves maintenance, parts and notes to that active boat only.

Maintenance cost / BHD Service, labour, inspection or repair cost.

Parts cost / BHD Batteries, sensors, filters, consumables or spare parts.

Cost note This note is saved to the active boat and appears in the downloaded report.

Cost input statusEditing MASAR-27

Fuel Price Update

Use this when Bahrain marine fuel price changes monthly. This updates the internal calculation only; the existing cost and report flow stays the same.

Fuel price / BHD per liter Example: 0.248

Effective month This note appears in the Excel report.

Fuel price statusCurrent: 0.248 BHD/L

Safety Release Queue

Safety only handles active boats sent by Maintenance. Released defects move to History and the professional report.

Boat	Defect	Severity	Status	Decision
No boat pending Safety Release.

SOS Safety Review

SOS Assist is routed to Safety. It cannot be deleted silently; Safety must acknowledge, close verified, or escalate. Once acknowledged or closed, it clears from Command active items but remains in the report/audit record.

Linked to SOS Assist

Workflow: SOS activated → Command Critical Action Item → Safety Review → Close-Out / Escalation → Report record.

Time	Boat	SOS Event	Severity	Position	Safety Status	Action
No SOS safety review pending.

Geofence Safety Review

Critical geofence violations are routed to Safety for acknowledgement, crew explanation, closure, or escalation. This does not automatically stop or release a boat; it creates an auditable safety review.

Linked to Geofencing

Workflow: Geofence violation → Command Action Item → Safety Review → Monthly Report record.

Time	Boat	Violation	Severity	Position / Speed	Safety Status	Action
No geofence safety review pending.

Defect History

Closed and released defects are kept here for review and reporting. They are removed from active action screens.

Boat	Defect	Severity	Closed / Released	Final Note
No closed defect history yet.

Practical 30-day pilot

Start with MASAR-27 only. Prove the device produces useful monthly reporting before expanding to the full fleet.

Approval Request

Phase 11 device / 1 boat

Duration30 days

OutputMonthly device report

DecisionExpand or adjust

Week 1

Install device on MASAR-27, confirm GPS, speed, heading, Starlink and LTE fallback.

Week 2-3

Collect real trips, test packet reliability, compare device records against actual operations.

Week 4

Generate monthly report and present cost, speed, maintenance and connectivity results.

Sign in